What Is a Gate Valve? Parts, Working Principle and Types
A gate valve is an isolation valve that starts or stops flow by raising or lowering a flat or wedge-shaped gate across the pipe. When fully open, the gate sits clear of the flow path, allowing fluid to pass through with very little pressure drop. Gate valves are designed for fully open or fully closed operation, rather than continuous flow regulation.

Gate valves are widely used for isolation in refineries, power plants, chemical processing facilities and water pipelines. In this guide, KPI Valves, a gate valve manufacturer in India based in Gujarat, explains the main parts of a gate valve, its working principle, common types and industrial applications.
How Does a Gate Valve Work?
A gate valve operates through the linear movement of its gate. Turning the handwheel rotates the threaded stem mechanism, which raises or lowers the wedge between two seat rings.
In a rising-stem design, the stem moves upward as the valve opens. In a non-rising-stem design, the stem rotates without moving vertically.
Opening: In the usual arrangement, the handwheel is turned anticlockwise, lifting the gate clear of the flow passage. Operators should always follow the opening direction marked on the valve or specified in the manufacturer's instructions.
Closing: In the usual arrangement, the handwheel is turned clockwise, lowering the gate between the seat rings. The wedge and seat geometry create sealing contact according to the valve design and operating conditions.
Multi-turn operation: A gate valve requires several handwheel turns to move between fully open and fully closed positions. Controlled operation can help reduce the risk of water hammer, but appropriate pipeline design and operating procedures remain essential.
Gate valves should generally not be operated partially open for continuous flow regulation. Part-open operation can cause vibration, erosion and premature wear of the wedge and seating surfaces.
For applications requiring throttling or flow regulation, a globe valve is generally more suitable.
Parts of a Gate Valve
Industrial gate valves contain several components that work together to provide pipeline isolation. Their construction varies depending on valve design, pressure class and operating conditions.
1. Body
The main pressure-containing component connects the valve to the pipeline through flanged or welded ends.
Typical materials include cast carbon steel (WCB), alloy steel (WC6, WC9) and stainless steel (CF8, CF8M).
2. Bonnet
The bonnet covers the upper section of the valve body and accommodates the stem assembly.
Common arrangements include bolted and pressure-seal bonnets.
3. Gate or Wedge
The gate is the closing element that moves across the flow passage.
Depending on the design, it may use body-compatible materials with stainless steel trim or hard-faced sealing surfaces.
4. Seat Rings
Seat rings provide the sealing surfaces against which the gate closes.
Common seating materials include 13% chromium steel, stainless steel and hard-faced materials such as Stellite.
5. Stem
The stem transfers motion from the handwheel or operating mechanism to the gate.
Typical materials include 13% chromium stainless steel and stainless steel grades such as SS 304 or SS 316.
6. Packing and Gland
The packing assembly seals around the stem to help prevent process fluid from escaping to the atmosphere.
Graphite and PTFE are commonly used packing materials, depending on the service.
7. Yoke and Handwheel
The yoke supports the stem operating mechanism, while the handwheel allows manual opening and closing.
Depending on the valve configuration, a gearbox or actuator may be provided.
8. Backseat
The backseat provides a secondary sealing contact between the stem and bonnet when the valve is fully open.
It is not a substitute for proper stem packing maintenance.
Types of Gate Valves
Gate valves are classified according to their gate construction, stem movement and bonnet design.
Types Based on Gate Design
Solid Wedge Gate Valve
A solid wedge consists of a single-piece closing element. Its relatively simple construction makes it suitable for many general liquid, gas and industrial process applications.
Flexible Wedge Gate Valve
A flexible wedge incorporates a slot or contour that permits limited elastic movement. This can help accommodate minor changes in seat alignment caused by thermal effects.
Its suitability for steam or hot-oil service depends on the pressure, temperature, materials and valve design.
Split Wedge Gate Valve
A split wedge uses two separate discs or wedge sections that accommodate the seating arrangement.
These designs are used in selected industrial applications, depending on process requirements.
Parallel Slide Gate Valve
Parallel slide designs use parallel sealing elements that are pressed against the seats through the valve's operating mechanism, springs or pressure-assisted arrangements.
They are used in certain steam and power-generation applications.
Types Based on Stem Design
Rising Stem Gate Valve (OS&Y)
In an Outside Screw and Yoke design, the stem rises as the valve opens, providing a visible indication of stem position.
The stem threads are positioned outside the pressure-containing fluid area.
This arrangement is widely used in industrial process plants.
Non-Rising Stem Gate Valve
A non-rising stem rotates without moving vertically, reducing the installation height required.
These valves are commonly used in buried water pipelines and space-restricted installations.
Types Based on Bonnet Design
Bolted Bonnet Gate Valve
The bonnet is secured to the valve body using bolts.
It can be dismantled for inspection or maintenance after the valve has been safely isolated and depressurised.
Pressure Seal Bonnet Gate Valve
A pressure-seal bonnet uses internal pressure to energise its sealing arrangement.
This construction is commonly selected for certain high-pressure and high-temperature services, including power-generation applications.
Welded Bonnet Gate Valve
The bonnet is welded to the body, eliminating the bolted body-to-bonnet joint as a potential external leakage path.
This construction is used in selected valve designs, including some smaller forged valves.
Where Are Gate Valves Used?
Gate valves are commonly used where pipelines require fully open or fully closed isolation with relatively low pressure loss when correctly sized and fully open.
Oil and Gas Refineries: Isolation of crude oil, petroleum products and utility pipelines.
Petrochemical and Chemical Plants: Process isolation in pipelines handling compatible chemicals and industrial fluids.
Power Generation: Isolation in selected boiler-feedwater, steam and condensate systems.
Fertiliser Plants: Isolation in suitable ammonia, urea and steam services.
Water and Wastewater Treatment: Pipeline and pumping-station isolation, including buried water distribution lines.
Marine and Offshore: Isolation in selected seawater, fuel and ballast piping systems.
The final valve design must match the process medium, pressure, temperature and applicable technical requirements.
Advantages and Limitations of Gate Valves
Advantages
Low pressure loss when correctly sized and fully open.
Many designs permit bidirectional flow, subject to design verification.
Metal-seated construction options for industrial shut-off applications.
Suitable designs are available for high-pressure and high-temperature services.
Gradual operation can help reduce the risk of water hammer when supported by proper operating procedures.
Limitations
Not recommended for continuous throttling or precise flow regulation.
Multi-turn operation can make opening and closing relatively slow.
Rising-stem designs require additional installation height.
Partial opening can cause vibration, erosion and seat or wedge damage.
Large gate valves may be heavier than comparable Ball Valves or Butterfly Valves.
Gate Valve Standards Buyers Should Know
The applicable standard depends on the valve construction, service conditions and purchaser specifications.
API 600: Requirements for steel gate valves used in petroleum and other process-industry applications.
BS 1414: A legacy British specification for steel wedge gate valves. Buyers should verify the required edition and contractual applicability.
API 603: Requirements for corrosion-resistant bolted-bonnet gate valves, commonly manufactured in stainless steel.
API 6D: Requirements for pipeline and piping valves, including applicable gate-valve designs used in pipeline service.
API 598: Inspection and pressure-testing requirements for valves, including applicable shell, closure and backseat tests.
The relevant standard and edition should be confirmed during technical specification review.
How to Choose the Right Gate Valve
Before requesting a quotation, industrial buyers should provide:
Valve size and pressure class: NPS/DN and Class 150, 300, 600, 900, 1500 or 2500, as required.
Process conditions: Fluid type, operating pressure and temperature.
Materials: Body and trim requirements, such as WCB with 13% chromium trim or CF8M for suitable corrosive service.
End connections: Flanged RF, RTJ or butt-weld connections.
Applicable standards: Design and inspection/testing standards specified for the project.
Operation: Handwheel, gearbox or actuator.
Inspection and documentation: Material test certificates, pressure-test reports and third-party inspection requirements.
Providing a complete valve datasheet helps the manufacturer assess technical suitability and prepare an accurate quotation.
Gate Valves from KPI Valves, Gujarat
KPI Valves, a brand of KPSHIV Industries Pvt. Ltd., manufactures industrial Gate Valves at its facility in Chandarda, Gujarat, near the Ahmedabad–Mehsana Expressway.
The company supports industrial buyers in India and international markets with valve solutions based on project specifications and operating requirements.
Available sizes, pressure classes, materials, construction options and applicable standards depend on the approved product range and individual project requirements.
Customers should contact KPI Valves to confirm the availability of a specific valve configuration.
For related industrial applications, explore our Globe Valves for flow regulation and Swing Check Valves for reverse-flow prevention.
Frequently Asked Questions
What is a gate valve used for?
A gate valve is used mainly to fully open or fully close a pipeline. It provides isolation in water, oil, gas, steam and chemical services where low pressure loss is required when the valve is fully open.
Can a gate valve be used for throttling?
A gate valve is generally intended for fully open or fully closed service, not continuous throttling. Operating it partially open can cause vibration, erosion and premature wear of the wedge and seat surfaces. A globe valve is generally more suitable for flow control.
What is the difference between a rising and non-rising stem gate valve?
In a rising-stem gate valve, the stem moves upward as the valve opens, providing a visible indication of stem position. In a non-rising-stem design, the stem rotates without rising, which can reduce the required installation height and may suit buried or space-restricted installations.
Which gate valve is best for steam?
A flexible-wedge gate valve may be suitable for steam service because its design can accommodate limited thermal movement. The appropriate wedge, body material and bonnet arrangement must be selected for the actual pressure, temperature, service conditions and applicable design standard. Pressure-seal bonnets are commonly used in some high-pressure, high-temperature applications.
Which standard applies to industrial gate valves?
The applicable standard depends on the valve design and service. Commonly referenced standards include API 600, API 603 and API 6D; BS 1414 may appear in legacy project specifications. API 598 covers valve inspection and pressure testing.
Does KPI Valves manufacture gate valves in India?
KPI Valves manufactures industrial gate valves at its plant in Chandarda, Gujarat. Please contact the company to confirm the available size, pressure class, material, design and applicable standard for your project.
Request a Gate Valve Quote
Need Gate Valves for a new industrial project or an equipment replacement?
Send your valve size, pressure class, material requirements and applicable standards to the KPI Valves team through our contact page.
Our team can review your requirements and provide a technical quotation.




Comments